Doc en Mibguide.pdf), which is provided on the APC Network Management Card utility CD. Access priority for logging on Only one user at a time can log on to the Management Card to use its internal user interface features. The priority for access is as follows: • Local access to the control console from a computer with a direct serial.
Installation Manual 9 APC Device IP Configuration Wizard You can use the APC Device IP Configuration Wizard at a computer running Microsoft ® Windows ® 2000, Windows Server ® 2003, or Windows XP to discover unconfigured Network Management Cards and configure their basic TCP/IP settings, one card at a time, over the network. Note: Most software firewalls must be temporarily disabled for the Wizard to discover unconfigured Network Management Cards. If autorun is enabled, the user interface of the CD starts when you insert the APC Network Management Card Utility CD into a computer on your network. Otherwise, open the file contents.htm on the CD. Select the Device IP Configuration Wizard from the main menu. When the Wizard discovers the unconfigured Network Management Card, follow the on-screen instructions.
Uchebnik russkogo yazika antonova voiteleva. Note: If you leave the option Start a Web browser when finished enabled, you can access the Network Management Card through your browser by using apc (the default) for both the user name and password.ini file utility You can use the.ini file export utility to export.ini file settings from configured Network Management Cards to one or more unconfigured Network Management Cards. The utility and documentation are included on the APC Network Management Card Utility CD. DHCP and BOOTP configuration The default TCP/IP configuration setting, DHCP, assumes that a properly configured DHCP server is available to provide TCP/IP settings to Network Management Cards. You can also configure the setting for BOOTP. A user configuration (.ini) file can function as a BOOTP or DHCP boot file.
For more information, see the TCP/IP configuration section of the Network Management Card User’s Guide, available from the Utility CD or the APC Web site, www.apc.com. If neither of these servers is available, configure the needed TCP/IP settings.